Accessories include electrode holder with 2m cable, earth clamp with 1.5m cable, chipping hammer and wire brush making the HYMMA-160 extremely cost effective. The HYMMA-160 ARC welder features a stepless regulator for infinite variable control of the welding current with a low current facility for effective welding of thinner materials. The welding (output) current of the HYMMA-160 can be regulated within the range of 10-160 Ampere making the HYMMA-160 adjustable to suit welding different materials and thicknesses of steel.
Beware of lower quality models by always checking the ‘Duty Cycle’. Duty cycle is the amount of time, within a 10 minute period the welder can be used, on a given output. For example, our 160A welder has a duty cycle of 35% when used on 160A output. This means it can be used for three and a half minutes in every 10 minute period.
Duty cycles for the Hyundai welder range shown below:
|Model||Output Amperage / Duty Cycle / Period of use within 10 minute period|
|MMA120||70A / 100% / 10minutes||90A / 50% / 6minutes||120A / 35% / 3.5minutes|
|MMA160||95A / 100% / 10minutes||120A / 50% / 6minutes||160A / 35% / 3.5minutes|
|MMA200P||155A / 100% / 10minutes||200A / 60% / 6minutes|
|TIG200||155A / 100% / 10minutes||200A / 60% / 6minutes|
|Mig180||105A / 100% / 10minutes||140A / 60% / 6minutes||180A / 35% / 3.5minutes|
Cheaper, lower quality welders claim to be a certain Amperage output, but can have a very low duty cycle on the output they have claimed. Always check the duty cycle to ensure you are getting the best value for money. The inverter technology used within the Hyundai welders has certain advantages compared to more traditional transformer welders.
The inverter type welders are usually lighter, more cost effective and usually require less input power for a comparable output. This makes them more cost effective not only to purchase, but also to run. Fitted with thermal overload protection to ensure maximum durability. Suitable for welding steel, stainless steel, copper, nickel, titanium and their alloys.
Suitable for fabricators, farmers, home mechanics, mobile technicians and DIY enthusiasts the HYMMA-160 is a good all rounder for welding with rods up to 4mm. The HYMMA-160 features high frequency starts allowing for smooth arc strikes. With low service and maintenance requirements, the HYMMA-160 is incredibly easy to use and maintain, and has full Hyundai UK parts back up.
In the box: Electrode holder with 2m cable, Earth clamp with 1.5m cable, Chipping hammer & Wire brush.
KNOW YOUR WELDER:
- (MMA) Manual Metal Arc - Manual Metal Arc Welding (MMA) or (MMAW) Manual Metal Arc Welding is flux shielded arc welding or informally as stick welding, is a manual arc welding process that uses a consumable electrode covered with a flux to lay the weld.
- (TIG) Tungsten Inert Gas - Tungsten Inert Gas Welding (TIG) or (GTAW) Gas Tungsten Arc Welding is an arc welding process that uses a non-consumable tungsten electrode to produce the weld.
- (MIG) Metal Inert Gas - Metal Inert Gas Welding (MIG), (GMAW) Gas Metal Arc Welding or (MAG) Metal Active Gas is a welding process in which an electric arc forms between a consumable wire electrode and the workpiece metal(s), which heats the workpiece metal(s), causing them to melt and join.
- Gross Weight: (kg) 8.00
- Model: HYMMA-160
- Input Voltage: (V) 230.00
- AC Frequency: 50.00
- Efficiency: (%) 85.00
- Power Factor: (Cosφ) 0.70
- No-Load Voltage: (V) 65.00
- Rated Output Range: (Amps) 10 - 160
- Duty Cycle: (%) Under 40ºC 35% @ 160A, 60% @ 120A. 100% @ 95A
- Current: @ 60% (A) 124.00
- Usable Electrode: (mm) 1.0-4.0
- Dimensions: (H x W x L) (mm) 360 X 250 X 310
- Net Weight: (kg) 6.00
- MPN: HYMMA-160
- GTIN: 8809429749116
- Brand: Hyundai
- Condition: New
- Weight: 8kg
*FREE Next Day Delivery is included as standard on most UK Mainland orders over £100. Orders under £100 - delivery is charged at £6.99. We aim to dispatch the same day on orders placed before 1pm Monday to Friday. Some restrictions apply. Orders placed after 1pm on a Friday will be sent out on the Monday when we are back in the office. Deliveries will take place on working days unless service is upgraded. Unfortunately we do NOT offer a local collection service. Please note we are closed on UK bank holidays.
Please contact us for a delivery quote if you would like to upgrade your order to a Saturday service.
Please note some remote UK locations are 48 hour minimum delivery, we cannot guarantee Next Day Delivery for these areas. Please be advised that locations such as the Scottish Highlands, may incur a delivery surcharge. Contact us prior to purchasing if you're unsure as to whether this will effect you.
We offer worldwide delivery, please contact us prior to ordering to ensure we can deliver to your country and for pricing/estimated arrival times. Please note: Import duties, taxes, and charges are not included in the order price. These charges are the buyer's responsibility and not that of Machine Direct. Please check with your country's customs office to determine any additional costs prior to purchasing.
All goods are brand new unless otherwise stated. If an item arrives damaged or faulty then it must be returned to us within 30 days of receipt. Unfortunately, we cannot refund any items that have been damaged due to misuse, wear and tear or accidents. Please contact us with your order reference for more details.
If you ordered an item incorrectly then you are welcome to return it for a refund or exchange. These must be returned to us in original condition and in the original packaging within 30 days of receipt. Please contact our support team with your order reference for more information.
All our products are covered by a manufacturers guarantee of 1 year unless otherwise stated. This covers faulty materials/workmanship. It does not cover general wear and tear or damage. All product warranties are subject to the manufacturers terms and conditions. Machine Direct is only a retailer of good and services, all individual product warranty claims will be managed by the manufacturer. We will be happy to help you contact the appropriate company & assist as necessary. However we are not responsible for any product directly and the manufacturers decision is final. Please be aware the product warranties are only valid to customers based in the United Kingdom. If you have any questions please contact our support team.