The HYMMA-121 is a lightweight and incredibly versatile single phase ARC/MMA welder from Hyundai that can be powered by a standard UK 3-pin 13amp plug.
Weighing only 4.5kg, the HYMMA-121 is easy to carry around thanks to its adjustable harness and lightweight pressed steel case with powder coated finish for extra corrosion resistance. Accessories include electrode holder with 2m cable, earth clamp with 1.5m cable and wire brush making the HYMMA-121 extremely cost effective.
The HYMMA-121 ARC welder features a stepless regulator for infinite variable control of the welding current with a low current facility for effective welding of thinner materials. The welding (output) current of the HYMMA-121 can be regulated within the range of 10-120 Ampere making the HYMMA-121 adjustable to suit welding different materials and thicknesses of steel. Fitted with a LCD digital display the HYMMA-121 features auto hot start and anti stick technology.
The inverter technology used within the Hyundai welders has certain advantages compared to more traditional transformer welders. The inverter type welders are usually lighter, more cost effective and usually require less input power for a comparable output. This makes them more cost effective not only to purchase, but also to run.
Fitted with thermal overload protection to ensure maximum durability. Suitable for welding steel, stainless steel, copper, nickel, titanium and their alloys.
Suitable for farmers, home mechanics, mobile technicians and DIY enthusiasts the HYMMA-121 is a good all rounder for welding with rods of 2.5mm and up to 3.2mm. The HYMMA-121 features high frequency starts allowing for smooth arc strikes.
With low service and maintenance requirements, the HYMMA-121 is incredibly easy to use and maintain, and has full Hyundai UK parts back up.
In the box: Electrode holder with 2m cable, Earth clamp with 1.5m cable & Wire brush.
Know your welder:
(MMA) Manual Metal Arc - Metal Arc Welding (MMA) or (MMAW) Manual Metal Arc Welding is flux shielded arc welding or informally known as stick welding, is a manual arc welding process that uses a consumable electrode covered with a flux to lay the weld.
(TIG) Tungsten Inert Gas - Tungsten Inert Gas Welding (TIG) or (GTAW) Gas Tungsten Arc Welding is an arc welding process that uses a non-consumable tungsten electrode to produce the weld.
(MIG) Metal Inert Gas - Metal Inert Gas Welding (MIG), (GMAW) Gas Metal Arc Welding or (MAG) Metal Active Gas is a welding process in which an electric arc forms between a consumable wire electrode and the workpiece metal(s), which heats the workpiece metal(s), causing them to melt and join.
Covered by Hyundai UK 2 year warranty.
- Model: HYMMA-121
- Input Voltage: (V)1P AC 230V, 50Hz
- Max Input: (kVA) 4.70
- Efficiency: (%) 85.00
- Power Factor: (Cosφ) 0.70
- No-Load Voltage: (V) 65.00
- Duty Cycle (%) Under 40ºC: 20.00
- Dimensions: (H x W x L) (mm) 340X240X300
- Net Weight: (kg) 4.50
- What's in the box: Electrode Holder With 2m Cable, Earth Clamp With 1.5m Cable, Mask & Brush
- Protection/Insulation Class: IP21S/F
- Output Current: (A)10 ~ 120
- MPN: HYMMA-121
- Brand: Hyundai
- Weight: 4.5kg
*FREE Next Day Delivery is included as standard on most UK Mainland orders over £100. Orders under £100 - delivery is charged at £6.99. We aim to dispatch the same day on orders placed before 1pm Monday to Friday. Some restrictions apply. Orders placed after 1pm on a Friday will be sent out on the Monday when we are back in the office. Deliveries will take place on working days unless service is upgraded. Unfortunately we do NOT offer a local collection service. Please note we are closed on UK bank holidays.
Please contact us for a delivery quote if you would like to upgrade your order to a Saturday service.
Please note some remote UK locations are 48 hour minimum delivery, we cannot guarantee Next Day Delivery for these areas. Please be advised that locations such as the Scottish Highlands, may incur a delivery surcharge. Contact us prior to purchasing if you're unsure as to whether this will effect you.
We offer worldwide delivery, please contact us prior to ordering to ensure we can deliver to your country and for pricing/estimated arrival times. Please note: Import duties, taxes, and charges are not included in the order price. These charges are the buyer's responsibility and not that of Machine Direct. Please check with your country's customs office to determine any additional costs prior to purchasing.
All goods are brand new unless otherwise stated. If an item arrives damaged or faulty then it must be returned to us within 30 days of receipt. Unfortunately, we cannot refund any items that have been damaged due to misuse, wear and tear or accidents. Please contact us with your order reference for more details.
If you ordered an item incorrectly then you are welcome to return it for a refund or exchange. These must be returned to us in original condition and in the original packaging within 30 days of receipt. Please contact our support team with your order reference for more information.
All our products are covered by a manufacturers guarantee of 1 year unless otherwise stated. This covers faulty materials/workmanship. It does not cover general wear and tear or damage. All product warranties are subject to the manufacturers terms and conditions. Machine Direct is only a retailer of good and services, all individual product warranty claims will be managed by the manufacturer. We will be happy to help you contact the appropriate company & assist as necessary. However we are not responsible for any product directly and the manufacturers decision is final. Please be aware the product warranties are only valid to customers based in the United Kingdom. If you have any questions please contact our support team.