This Hyundai pump is built from high quality materials to ensure a long lasting and reliable performance. The HY40-2 is capable of transferring 250L/min and has a 40mm / 1.5" inlet and outlet. The pump has a total head of 35m and a maximum suction head of 8m.
Please see the diagram below explaining the different meanings of head when used in reference to a water pump. The ‘head’ is also referred to as ‘lift’ by some manufacturers. Petrol Water Pump Housed within a rugged open frame, with a convenient carry handle, it's easy to move and store but this frame also provides protection from potential damage to the pump and engine itself.
Before using your pump, make sure you have your suction hose and layflat hose ready. The suction hose is used between the water source you are looking to move and the pump, and is more sturdy and strengthened to stop it being ‘sucked’ flat while in use. The layflat hose is used on the outlet of the pump and usually sits ‘flat’- hence the name. Try to use the minimum amount of suction hose possible and place the pump as close to the water as you can.
Simply attach the strainer (the plastic ‘cage’ included with the pump), to the end of the suction hose, which prevents debris being sucked into the pump and causing damage to the impeller. Then, using the provided collars, attach the other end of the suction hose to the inlet on the pump.
Use the other collar to attach your layflat hose and run it to then are you want the water to be discharged to. Mix your 2-Stroke semi-synthetic oil and unleaded fuel together at a 40:1 ratio, as instructed in the manual and fill to approximately 80% full in the tank, which allows for any expansion. This pump is self priming, however in order to create a vacuum and start the lifting process you need to fill the pump housing with water.
You can do this by removing the the cap on the top of the pump casing and filling with fresh water, then simply follow the starting procedure in the manual to begin pumping. Ensure that there are no air leaks on the suction side, as this will prevent the pump from priming. In the box: HY40-2 pump, hose fitting kit, suction filter, 2-stroke fuel/oil mixing bottle, tool kit.
All Hyundai petrol water pumps are supplied with a 1 year Hyundai warranty.
- Gross Weight (kg) 10.00
- Engine Type Single cylinder, 2-stroke, air cooled
- Engine Size (cc) 50.8cc
- Euro 2 Emissions, 2-Stroke Fuel Tank (L) 0.80
- Fuel Type Unleaded petrol with 40:1 mix of 2-Stroke Semi-synthetic Oil
- Noise Level (dB) 111.00
- Maximum Power (kW) 1.8kW
- Starting Method Recoil Pull
- Start Inlet (inches / mm) 1.5 / 40 Outlet (inches / mm) 1.5 / 40
- Maximum Flow Rate (L/min) 250.00
- Total Head (m) 30-35
- Suction Head (m) 8.00
- Dry Weight (kg) 10.00
- Boxed Dimensions L x W x H (mm) 385 x 300 x 370
- MPN: HY40-2
- GTIN: 0747150287737
- Brand: Hyundai
- Condition: New
- Weight: 10kg
*FREE Next Day Delivery is included as standard on most UK Mainland orders. *We aim to dispatch the same day on orders placed before 1pm Monday to Friday. Orders placed after 1pm on a Friday will be sent out on the Monday when we are back in the office. Deliveries will take place on working days unless service is upgraded. Unfortunately we do NOT offer a local collection service. Please note we are closed on UK bank holidays.
Please contact us for a delivery quote if you would like to upgrade your order to a Saturday service.
Please note some remote UK locations are 48 hour minimum delivery, we cannot guarantee Next Day Delivery for these areas. Please be advised that locations such as the Scottish Highlands, may incur a delivery surcharge. Contact us prior to purchasing if you're unsure as to whether this will effect you.
We offer worldwide delivery, please contact us prior to ordering to ensure we can deliver to your country and for pricing/estimated arrival times. Please note: Import duties, taxes, and charges are not included in the order price. These charges are the buyer's responsibility and not that of Machine Direct Limited. Please check with your country's customs office to determine any additional costs prior to purchasing.
All goods are brand new unless otherwise stated. If an item arrives damaged or faulty then it must be returned to us within 30 days of receipt. Unfortunately, we cannot refund any items that have been damaged due to misuse, wear and tear or accidents. Please contact us with your order reference for more details.
If you ordered an item incorrectly then you are welcome to return it for a refund or exchange. These must be returned to us in original condition and in the original packaging within 30 days of receipt. Please contact our support team with your order reference for more information.
All our products are covered by a manufacturers guarantee of 1 year unless otherwise stated. This covers faulty materials/workmanship. It does not cover general wear and tear or damage. All product warranties are subject to the manufacturers terms and conditions. Machine Direct is only a retailer of good and services, all individual product warranty claims will be managed by the manufacturer. We will be happy to help you contact the appropriate company & assist as necessary. However we are not responsible for any product directly and the manufacturers decision is final. Please be aware the product warranties are only valid to customers based in the United Kingdom. If you have any questions please contact our support team.